16MP Sony IMX298 DFOV117 Auto Focus Camera module MIPI Interface
Product Description:
IMX298-0AQH5-C is a diagonal 6.521 mm (Type 1/2.8) 16 Mega-pixel
CMOS active pixel type stacked image sensor with a square pixel
array. It adopts Exmor RS™ technology to achieve high speed image
capturing by column parallel A/D converter circuits and high
sensitivity and low noise image (comparing with conventional CMOS
image sensor) through the backside illuminated imaging pixel
structure. R, G, and B pigment primary color mosaic filter is
employed. By introducing spatially varying exposure technology,
high dynamic range still pictures and movies are achievable. It
equips an electronic shutter with variable integration time. It
operates with three power supply voltages: analog 2.5 V, digital
1.1 V and 1.8 V for input/output interface andachieves low power
consumption.
Features:
1. Back-illuminated and stacked CMOS image sensor Exmor RS
2. Phase Detection Auto Focus (PDAF)
3. Single Frame High Dynamic Range (HDR) with equivalent full
pixels
4. High signal to noise ratio (SNR)
5. Full resolution @30 frame/s (Normal / HDR). 4K2K @30 frame/s
(Normal / HDR) 1080p @60 frame/s (Normal / HDR)
6. Output video format of RAW10/8, COMP8
7. Pixel binning readout and H/V sub-sampling function
8. Advanced Noise Reduction (Chroma noise reduction and RAW noise
reduction)
9. Independent flipping and mirroring
10. CSI-2 serial data output (MIPI 2lane/4lane, Max. 1.5 Gbps/lane,
D-PHY spec. ver. 1.1 compliant)
11. 2-wire serial communication
12. Two PLLs for independent clock generation for pixel control and
data output interface
13. Dynamic Defect Pixel Correction
14. Power-on reset function
15. Dual sensor synchronization operation
16. 9 K bit of OTP ROM for users
17. Built-in temperature sensor
Technical Parameters:
| Focus Type | Auto Focus |
| View Angle | 117° |
| Focus Range | 10cm-∞ |
| Sensor Size | 1/3.06inch |
| Sensor Type | Sony IMX298 |
| Lens | G7623A |
| Certificate | CE, FCC, ISO, REACH |
| Pixel | 16MP |
| Pinout | 30pin |
| Features | Wide Angle |
Customized Service:
We can customize FPC length, module shape, module head size, lens
holder, imaging direction, pinout, connector, VCM, lens, firmware,
etc.
Customized Process:
1. You can provide drawings or samples, as well as request
documentation and developed by
our engineering staff.
2. Communication or Meeting
3. We will communicate with you in detail to determine somewhat
product you need and try to set the most suitable product for you
according to your needs.
4. Sample Development
5. Determine the details of the development sample and the delivery time. Communicate at any time
to ensure smooth progress.
6. Sample Testing
7. Test and age on your application, feedback test results, no need
to modify, mass production.
Why Choose us:
Applications:
Machine Vision
Inspection Tester
Video Conference System
About US:
Cooperative Brands & Customers:
